Error: SET TO <TOOL MODE>

Crop marks cannot be read when the machine is in Sensor Mode.

Press any key to clear the error message. Change the machine's settings to Tool Mode, and then resend the data. When doing so, use four crop marks. When the machine is in Tool Mode, it is not possible to cut using three crop marks.
If you want to use three crop marks, leave the machine in Sensor Mode and change the shape and color of the crop marks, or the color and glossiness of the material.

1. Press  several times to display the screen shown in the figure.
   

   
   
   

2. Press  several times to display the screen shown in the figure.

   

    

3. Press  to select TOOL MODE.