Overview of all knifes/blades with correct parameters and specs

ZEC-A1003

Cemented carbide cutter for normal vinyl
(red safety cap) 3pcs/box
Offset=0,25mm
Angle=50 degree

ZEC-A1005

Cemented carbide cutter for normal vinyl
(yellow safety cap) 3pcs/box
Offset=0,25mm
Angle=50 degree

ZEC-A3017

Cemented carbide cutter for fine detail cutting
(blue safety cap) 3pcs/box
Offset=0,175mm
Angle=45 degree

ZEC-A3050

Cemented carbide cutter for thick material
(green safety cap) and sandblast stencil
5pcs/box
Offset=0,5mm
Angle=32 degree

ZEC-A5025

Cemented carbide cutter for hard
(black safety cap) and/or fluorescent vinyl
3pcs/box
Offset=0,25mm
Angle=50 degree

ZEC-U1715

Exclusively for sandblast sheet.
The tip is sharp and easily broken.
Supported Sheet Sandblast
Offset=0,25mm
Angle=17 degree

ZEC-U3017

Suitable for small letters.
Supported Sheet PVC Sheet
Offset=0,175mm
Angle=45 degree

ZEC-U3050

Suitable for cardboard. Unsuitable for perforated cutting as the blade will pull out.
Supported Sheet PVC Sheet, Sandblasting Mask and Cardboard
Offset=0,5mm
Angle=32 degree

ZEC-U3075

Suitable for cardboard. Equipped with E-ring to prevent coming off.
Supported Sheet PVC Sheet, Sandblasting Mask and Cardboard
Offset=0,75mm
Angle=32 degree

ZEC-U3100

Suitable for cardboard. Equipped with E-ring
to prevent coming off
Supported Sheet PVC Sheet, Sandblasting Mask and Cardboard
Offset=1,00mm
Angle=32 degree

ZEC-U5010

Extremely high durability
Supported Sheet Window Tint
Offset=0,5mm
Angle=55 degree

ZEC-U5022

Durability is higher than U5025.
However, cutting quality is inferior
Supported Sheet PVC/Fluorescent
Offset=0,25mm
Angle=55 degree

ZEC-U5025

High performance, high durability.
Well balanced
Supported Sheet PVC/Fluorescent
Offset=0,25mm
Angle=50 degree

ZEC-U5032

Sharper than U5025. Cut quality is
better than U5025
Supported Sheet PVC/Fluorescent
Offset=0,25mm
Angle=55 degree

Sheet Cutting Knife

Blade,Olfa Auto Cutter XB10