How to add structural ink to my Text _Vol.03

Question

How can I add structural texture ink to the text of my Design.

Pre-Request

1. Minimum release version : Roland DG Connect Designer v2.0
2. Valid Roland DG Connect ID
3. A design has been setup

Solution

1. How to movie 

2. In the Design view, on the left side we have our "Design Elements".  Click the "T" "Text" icon
3. You can "double click" on the artboard to add text or you can "click" "Add Text".
4. Write your text
5. Select your Font eventually followed by selection a Font Family
6. Define the size of your font by entering a value or by scaling the text box by "Click and Hold"  on one of the "4 Corners" drag outside to enlarge or inside to reduce
7. A number of text alignment tools are available
8. Click "Fill Color"
   1. "Solid" panel opens
      1. Look for "VersaWorks Colors"
      2. Select the color with the text tool tip (when moving over de color the name will appear) "RDG_Structural"
   2. "Pattern"
      1. Click the Pattern panel to see the different patterns available
      2. Click a pattern which you would like to use
      3. By default "RDG_Structural" is assigned to the selected panel
      4. If you want to "invert" the color check the "Invert" checkbox
9. Adding a stroke
   1. Close the color panel and "click" "Stroke Color"
   2. Same principle as with "Fill Color" selected a solid color or apply a pattern to your stroke
   3. Additional on stroke,
      1. when selecting "RDG_Structural" the default minimal value is 1,4 mm.
      2. You can select the stroke type and thickness