Applying structural ink to an inverted selected image part - Advanced 1 _ Vol.07

Question

How can I apply a structural pattern to a selected image part as well to the inverted selection from the initial selection.

Pre-Request

1. Minimum release version : Roland DG Connect Designer v2.0
2. Valid Roland DG Connect ID
3. DIMENSE Module is active

Solution

Advanced 1 = Make a selection in an image apply a pattern to the selection, invert the selection and apply a different pattern to this selection

1. How to movie 

2. Setup your Design with the DIMENSE Module
3. Load an image
4. Double "Click" the Image or "Click" the "Edit" button in the Image asset window
5. By doing this the "Edit Image" panel will open
6. Select the "Selector" tool
   1. "Unclick" the "Select Image" selector
   2. "Click" the selector "Keep original selection after inverse" ==> This will make it possible to inverte your made selection
   3. Inorder to select multiple area's, you can "Click" the "+" icon or hold the "Shift" Key.
   4. Deselecting a part, maybe because you selected elements which you don't want to have structural ink assigned you "Click" the "-" icon or you make a key combination of "Shift" + "Option"
7. Select the parts were you would like to assign a pattern
8. Select "Fill Color"
   1. Select a "Solid" color or "Pattern"
9. Select "Stroke Color"
   1. By default Black is assigned, if you don't want a color "Click" none or select "Structural Ink" or any other color
10. The area is filled with the selected color or pattern
11. "Click" the "Invert" button
12. Select "Fill Color"
    1. Select a "Solid" color or "Pattern"
13. Select "Stroke Color"
    1. By default Black is assigned, if you don't want a color "Click" none or select "Structural Ink" or any other color
14. The area is filled with the selected color or pattern and the borders are having a color or no color assigned.