Partial overprinting

*The use of [Execute PREFEED Oparation] is recommended to ensure that the sheet is correctly returned to the origin position before printing.

Partial overprinting cannot be done in a single process. Please set [Return to Origin After Printing] and print in two or more processes.

   *The print position of each plate may shift depending on the size of the print data, weight of the media, etc.

1. In the first step, check [Return to Origin After Printing] and [Execute PREFEED Oparation] checkboxes.

2. Perform the first printing.

3. If the sheet is pulled back after printing, change to the [mode] you want to overprint.

4. Set the number of overprints and print a second time.