"Time for Sponge Replace" Message

Important notes on this procedure:

• Wear gloves and safety glasses when replacing the ink-absorbent material.
• If any ink gets on your hands or clothing, wash it off as soon as possible.
• Dispose of used absorbent material in accordance with your local laws.

When this message is displayed on your VersaCAMM please follow the below steps.

Required material:

1. Switch off the sub power and the main power.

2. Remove the side cover.

3. Pull out the discharged-ink tray and replace the absorbent material.

4. Secure the discharged-ink tray in place and re-attach the side cover.

5. Switch on the main power and the sub power. The below will be displayed.

6. Press Enter. The process is complete.