Roland DG Connect Setup Guide -- For Mac OS --
Roland DG Connect Hub is software that uploads the operational status of the printer and other information to the cloud environment. If Roland DG Connect Hub is not running or if you are not signed in, you will not be able to view the device status from Roland DG Connect.
Before starting your daily work, please make sure that Roland DG Connect Hub is running.
Additionally, for managing licenses in VersaWorks 7, it is mandatory to register a Roland DG Connect ID when using VersaWorks 7. Please make sure that you install Roland DG Connect Hub and complete the ID registration.
If you are using a Mac OS computer and connecting the printer and the computer with a network cable, please refer to the following procedure.
- If you are using a Windows PC and connecting the printer or cutting machine with a network cable, please refer to the steps in the following link.
https://support.rolanddg.com/hc/en-us/articles/43642210630297 - If you are using a Windows PC and connecting the printer or cutting machine with a USB cable, please refer to the steps in the following link.
https://support.rolanddg.com/hc/en-us/articles/43926541955225
Setup instructions if you are using a Mac OS and connecting your printer and computer with a network cable
There are four steps to set up Roland DG Connect.
1. Download and Install Roland DG Connect Hub.
2. Create a new Roland DG Connect ID.
3. Device set up on Roland DG Connect Hub.
4. VersaWorks 7 Installation and License Authentication
1. Download and Install Roland DG Connect Hub
To use Roland DG Connect, Roland DG Connect Hub application is necessary for
connecting your printer with the cloud. Please download the latest version of Roland DG Connect Hub.
1-1 Click the link below to start downloading Roland DG Connect Hub for Mac Installation file.
https://downloadcenter.rolanddg.com/contents/software_parts/connect_info_en.html
1-2 Double-click "RolandDGConnectHub.pkg" from downloaded "RolandDGConnectHub-installer.dmg" to start installation.
2. Create a new Roland DG Connect ID
In this step, you create a Roland DG Connect ID. If you already have
your Roland DG Connect ID, please pass this step and proceed to step 3.
2-1 Start Roland DG Connect Hub from Launch pad or application folder.
2-2 Click “Register” button on the right.
2-3 Enter your Email Address (Roland DG Connect ID) and Click “Send verification code”
2-4 You will receive an Email with a verification code as below.
2-5 Enter your verification code and click “Verify Code”.
2-6 Enter or select all the necessary information and click “Create”.
3．Device set up on Roland DG Connect Hub
3-1 Select ”Select from auto-detected device" on the "Register device" screen.
3-2 Detected devices will be displayed. Select the device you want to register and click “Register”.
3-3 If no devices are found on the network, select "Search by IP address" and enter the IP address of the printer (device) to register it.
Registration is complete when the screen appears as shown below. Click the Roland DG Connect icon and then click "Open" to start Roland DG Connect.
4. VersaWorks 7 Installation and License Authentication
4-1 Click the "VersaWorks 7" icon and then click "Install" to download the VersaWorks 7 installer. Follow the on-screen instructions to install VersaWorks 7.
4-2 When you start VersaWorks 7, the license authentication screen shown below will appear. Make sure that Roland DG Connect Hub is running, then click "Online Authentication" to authenticate the license for VersaWorks 7.
Enjoy the wonderful features of Roland DG Connect.