Roland DG Connect Setup Guide -- For Mac PC --
Roland DG Connect Hub ist eine Software, die den Betriebsstatus des Druckers und andere Informationen in die Cloud-Umgebung hochlädt. Wenn Roland DG Connect Hub nicht läuft oder Sie nicht angemeldet sind, können Sie den Gerätestatus nicht über Roland DG Connect einsehen.
Bevor Sie mit Ihrer täglichen Arbeit beginnen, stellen Sie bitte sicher, dass Roland DG Connect Hub läuft.
Außerdem ist es für die Verwaltung von Lizenzen in VersaWorks 7 zwingend erforderlich, eine Roland DG Connect-ID zu registrieren, wenn Sie VersaWorks 7 verwenden. Bitte stellen Sie sicher, dass Sie Roland DG Connect Hub installieren und die ID-Registrierung abschließen.
Wenn Sie einen Mac oder einen PC verwenden und den Drucker und den PC mit einem Netzwerkkabel verbinden, befolgen Sie bitte die folgenden Schritte.
- If you are using a Windows PC and connecting the printer or cutting machine with a network cable, please refer to the steps in the following link.
https://support.rolanddg.com/hc/en-us/articles/43642210630297 - If you are using a Windows PC and connecting the printer or cutting machine with a USB cable, please refer to the steps in the following link.
https://support.rolanddg.com/hc/en-us/articles/43926541955225
Istruzioni di configurazione se si utilizza macOS e si collega la stampante al computer tramite cavo di rete
La configurazione di Roland DG Connect comprende quattro passaggi:
- Creare un nuovo ID Roland DG Connect
- Scaricare e installare Roland DG Connect Hub
- Configurare il dispositivo in Roland DG Connect Hub
- Installare VersaWorks 7 ed eseguire l’autenticazione della licenza
1. Creare un nuovo ID Roland DG Connect
Per utilizzare VersaWorks 7, è necessario l’applicazione Roland DG Connect Hub, che collega il dispositivo al cloud. Seguire i passaggi riportati di seguito per scaricare l’ultima versione.
1-1 Fare clic sul link seguente per aprire il sito Roland DG Connect:
Open Roland DG Connect
https://connect.rolanddg.com/#/home
2. Download e installazione di Roland DG Connect Hub
2-1 Fare clic sull’icona di download nell’angolo in alto a sinistra della schermata principale, quindi scaricare e installare Roland DG Connect Hub.
3. Configurazione del dispositivo in Roland DG Connect Hub
3-1 Nella schermata “Register device”, selezionare “Select from auto-detected device”.
4. Installazione di VersaWorks 7 e autenticazione della licenza
4-1 Fare clic sull’icona “VersaWorks 7” e quindi su “Install” per scaricare il programma di installazione。Seguire le istruzioni visualizzate sullo schermo per installare VersaWorks 7。
Enjoy the wonderful features of Roland DG Connect.
Verwendung der automatischen Übersetzung