Roland DG Connect Setup Guide -- For Mac PC --
O Roland DG Connect Hub é um software que faz o upload do status operacional da impressora e de outras informações para o ambiente de nuvem. Se o Roland DG Connect Hub não estiver em execução ou se você não estiver conectado, não será possível visualizar o status do dispositivo no Roland DG Connect.
Antes de iniciar seu trabalho diário, certifique-se de que o Roland DG Connect Hub esteja em execução.
Além disso, para gerenciar licenças no VersaWorks 7, é obrigatório registrar um Roland DG Connect ID ao usar o VersaWorks 7. Certifique-se de instalar o Roland DG Connect Hub e concluir o registro da ID.
Se estiver usando um Mac ou PC e conectando a impressora e o PC com um cabo de rede, consulte as etapas a seguir.
- If you are using a Windows PC and connecting the printer or cutting machine with a network cable, please refer to the steps in the following link.
https://support.rolanddg.com/hc/en-us/articles/43642210630297 - If you are using a Windows PC and connecting the printer or cutting machine with a USB cable, please refer to the steps in the following link.
https://support.rolanddg.com/hc/en-us/articles/43926541955225
macOS를 사용하고 프린터를 네트워크 케이블로 컴퓨터에 연결하는 경우 설정 방법
Roland DG Connect 설정은 다음의 4단계로 구성됩니다:
- Roland DG Connect ID 생성
- Roland DG Connect Hub 다운로드 및 설치
- Roland DG Connect Hub에서 장치 설정
- VersaWorks 7 설치 및 라이선스 인증
1. Roland DG Connect ID 생성
VersaWorks 7을 사용하려면 장치를 클라우드에 연결하는 Roland DG Connect Hub 애플리케이션이 필요합니다. 최신 버전을 다운로드하려면 아래 단계를 따라 주십시오.
1-1 아래 링크를 클릭하여 Roland DG Connect 웹사이트를 엽니다:
Open Roland DG Connect
https://connect.rolanddg.com/#/home
2. Roland DG Connect Hub 다운로드 및 설치
2-1 홈 화면 좌측 상단의 다운로드 아이콘을 클릭한 후 Roland DG Connect Hub을 다운로드하고 설치합니다.
3. Roland DG Connect Hub에서 장치 설정
3-1 “Register device” 화면에서 “Select from auto-detected device”를 선택합니다.
4. VersaWorks 7 설치 및 라이선스 인증
4-1 “VersaWorks 7” 아이콘을 클릭한 다음 “Install”을 클릭하여 설치 프로그램을 다운로드합니다. 화면의 안내에 따라 VersaWorks 7을 설치하십시오.
Enjoy the wonderful features of Roland DG Connect.
Uso da tradução automática