Unterstützte Roland DG Connect-Funktionen für das Modell Typ 4
Bei den folgenden Modellen sind einige der Roland DG Connect-Funktionen eingeschränkt. Die Einschränkungen und Verfügbarkeiten entnehmen Sie bitte der folgenden Tabelle.
Um die Funktionen von Roland DG Connect richtig nutzen zu können, müssen Sie über die neueste Version der folgenden Komponenten verfügen.
Der Roland DG Connect Hub muss außerdem auf demselben PC wie VersaWorks installiert sein.
Roland DG Connect Hub
VersaWorks
The firmware of the printer you are using
Type 4 Models: BN-20/20A, BN-20D, LEC2-300, LEC-540/330, LEF-12i, LEF2-300/200, LEF2-300D, LEF2-300M, LEF2-300UV/200UV, LEF-300/200, RF-640/640A, SF-200, SP-540i/300i, VS-640i/540i/300i, XR-640
| Roland DG Connect feature | Supported/not supported | Remarks |
| Limited support | *1 | |
| Limited support | *2 | |
| Not supported | ||
| Supported | ||
| Not supported | ||
| Supported | *8 | |
| Supported | ||
| Limited support | *3 | |
| Dealer Registration | Supported | |
| Limited support | *4 | |
| Limited support | *5 | |
| Not supported | ||
| Supported | *6 | |
| ROI Business Dashboard Job log | Supported | |
| Business Dashboard Ink, media usage | Limited support | *6 |
| Business Dashboard Operational History | Limited support | *7 |
| Versaworks Settings Backup | Supported | |
| Versaworks Job Backup | Supported | |
| Versaworks Remote | Supported |
|
| Not supported | ||
| Supported | ||
| Supported | ||
| Supported | ||
| Roland DG Connect Designer VC Module | Supported |
*1 : The ink consumption is updated every 3 hours.
*2 : The ink level will only be displayed when both Roland DG Connect Hub and the printer are in online status. Additionally, the ink levels will be updated every 3 hours.
*3 : Error notifications, alert notifications, and print completion time notifications will not be sent to your PC or mobile deviceds
*4 : The warranty status may not be displayed depending on your region.
*5 : The print completion time prediction, health check, and thumbnail display are not available. The status display during service calls cannot be shown. This feature is only available when the printer is connected to Roland VersaWorks via a network connection.
*6 : Media usage for each preset of the main unit cannot be displayed. It will be displayed as one media usage for all presets.
*7 : There may be cases where print records cannot be reflected due to printing cancellations or other factors.
*8: Printer firmware upgrades cannot be performed from a Mac PC.
（Verwenden Sie die automatische Übersetzung）