Roland DG Connect supported features for Type 6 model
The following model has limitations on some of the Roland DG Connect features. Please refer to the following table for the limitations and availabilities.
In order to properly use the features of Roland DG Connect, you must have the latest version of the following items.
The Roland DG Connect Hub must also be installed on the same PC as VersaWorks.
- Roland DG Connect Hub
- VersaWorks
- The firmware of the printer you are using
Type 6 model: GS2-24
| Roland DG Connect feature | Supported/not supported | Remarks |
| Limited support | *1 | |
| Not supported | ||
| Not supported | ||
| Supported | ||
| Not supported | ||
| Supported | ||
| Supported | ||
| Limited support | *2 | |
| Dealer Registration | Supported | |
| Limited support | *3 | |
| Not supported | ||
| Limited support | *4 | |
| Limited support | *4 | |
| Not supported | ||
| Not supported | ||
| ROI Business Dashboard Job log | Not supported | |
| ROI Business Dashboard Ink, media usage | Not supported | |
| Business Dashboard Operational History | Not supported | |
| Versaworks Settings Backup | Supported | |
| Versaworks Job Backup | Supported | |
| Not supported | ||
| Supported | ||
| Supported | ||
|
Roland DG Connect Designer |
Supported |
*1 : Dashboard is only available when connected to the network from Roland VersaWorks.
*2 : Alert notifications will not be sent.
*3 : The warranty status may not be displayed depending on your region.
*4 : Print completion time prediction, thumbnail display of print data, ink type, ink consumption, and health check are not displayed. This feature is only available when the printer is connected to Roland VersaWorks via a network connection.