Fonctionnalités du Roland DG Connect prises en charge pour le modèle de type 5
Les modèles suivants ont des limitations sur certaines fonctions du Roland DG Connect. Veuillez consulter le tableau suivant pour connaître les limitations et les disponibilités.
Afin d'utiliser correctement les fonctions de Roland DG Connect, vous devez disposer de la dernière version des éléments suivants.
Le Roland DG Connect Hub doit également être installé sur le même PC que VersaWorks.
Roland DG Connect Hub
VersaWorks
The firmware of the printer you are using
Type 5 Models: EJ-640, RT-640, XT-640
| Roland DG Connect feature | Supported/not supported | Remarks |
| Limited support | *1 | |
| Not supported | ||
| Not supported | ||
| Supported | ||
| Not supported | ||
| Supported | *5 | |
| Supported | ||
| Limited support | *2 | |
| Dealer Registration | Supported | |
| Limited support | *3 | |
| Limited support | *4 | |
| Not supported | ||
| Not supported | ||
| ROI Business Dashboard Job log | Not supported | |
| Business Dashboard Ink, media usage display | Not supported | |
| Business Dashboard Operational History | Not supported | |
| Versaworks Settings Backup | Supported | |
| Versaworks Job Backup | Supported | |
| Versaworks Remote | Supported |
|
| Not supported | ||
| Supported | ||
| Supported | ||
| Supported | ||
| Roland DG Connect Designer VC Module | Supported |
*1 : The ink consumption is updated every 3 hours.
*2 : Error notifications, alert notifications, and print completion time notifications will not be sent to your PC or mobile devices.
*3 : The warranty status may not be displayed depending on your region.
*4 : The print completion time prediction, health check, and thumbnail display are not available. The status display during service calls cannot be shown. This feature is only available when the printer is connected to Roland VersaWorks via a network connection.
*5: Printer firmware upgrades cannot be performed from a Mac PC.
（Use de la traduction automatique）