유형 4 모델에 대한 Roland DG Connect 지원 기능 – Roland DG Care

다음 모델에는 일부 Roland DG Connect 기능에 제한이 있습니다. 제한 사항과 사용 가능 여부는 다음 표를 참조하십시오.

Roland DG Connect의 기능을 제대로 사용하려면 다음 항목의 최신 버전이 있어야 합니다.

또한 Roland DG Connect 허브는 VersaWorks와 동일한 PC에 설치되어 있어야 합니다.

Roland DG Connect Hub
VersaWorks
The firmware of the printer you are using

Type 4 Models: BN-20/20A, BN-20D, LEC2-300, LEC-540/330, LEF-12i, LEF2-300/200, LEF2-300D, LEF2-300M, LEF2-300UV/200UV, LEF-300/200, RF-640/640A, SF-200, SP-540i/300i, VS-640i/540i/300i, XR-640

Roland DG Connect feature	Supported/not supported	Remarks
Dashboard (Device menu)	Limited support	*1
Ink Levels (Device menu)	Limited support	*2
Health Check (Device Menu)	Not supported
Job Log (Device menu)	Supported
Error Log (Device menu)	Not supported
Firmware (Device menu)	Supported	*8
Nickname	Supported
Notification	Limited support	*3
Dealer Registration	Supported
Warranty Status	Limited support	*4
Remote Monitoring & Control	Limited support	*5
Remote Control	Not supported
ROI Business Dashboard	Supported	*6
ROI Business Dashboard Job log	Supported
Business Dashboard Ink, media usage	Limited support	*6
Business Dashboard Operational History	Limited support	*7
Versaworks Settings Backup	Supported
Versaworks Job Backup	Supported
Versaworks Remote	Supported
Media Inventory Management	Not supported
Roland DG Connect PrintAutoMate	Supported
Multi-User	Supported
Roland DG Connect Designer	Supported
Roland DG Connect Designer VC Module	Supported

*1 : The ink consumption is updated every 3 hours.

*2 : The ink level will only be displayed when both Roland DG Connect Hub and the printer are in online status. Additionally, the ink levels will be updated every 3 hours.

*3 : Error notifications, alert notifications, and print completion time notifications will not be sent to your PC or mobile deviceds

*4 : The warranty status may not be displayed depending on your region.

*5 : The print completion time prediction, health check, and thumbnail display are not available. The status display during service calls cannot be shown. This feature is only available when the printer is connected to Roland VersaWorks via a network connection.

*6 : Media usage for each preset of the main unit cannot be displayed. It will be displayed as one media usage for all presets.

*7 : There may be cases where print records cannot be reflected due to printing cancellations or other factors.

*8: Printer firmware upgrades cannot be performed from a Mac PC.

(자동 번역 사용)

Menu

관련 문서