유형 5 모델에 대한 Roland DG Connect 지원 기능
다음 모델에는 일부 Roland DG Connect 기능에 제한이 있습니다. 제한 사항과 사용 가능 여부는 다음 표를 참조하십시오.
Roland DG Connect의 기능을 제대로 사용하려면 다음 항목의 최신 버전이 있어야 합니다.
또한 Roland DG Connect 허브는 VersaWorks와 동일한 PC에 설치되어 있어야 합니다.
Roland DG Connect Hub
VersaWorks
The firmware of the printer you are using
Type 5 Models: EJ-640, RT-640, XT-640
| Roland DG Connect feature | Supported/not supported | Remarks |
| Limited support | *1 | |
| Not supported | ||
| Not supported | ||
| Supported | ||
| Not supported | ||
| Supported | *5 | |
| Supported | ||
| Limited support | *2 | |
| Dealer Registration | Supported | |
| Limited support | *3 | |
| Limited support | *4 | |
| Not supported | ||
| Not supported | ||
| ROI Business Dashboard Job log | Not supported | |
| Business Dashboard Ink, media usage display | Not supported | |
| Business Dashboard Operational History | Not supported | |
| Versaworks Settings Backup | Supported | |
| Versaworks Job Backup | Supported | |
| Versaworks Remote | Supported |
|
| Not supported | ||
| Supported | ||
| Supported | ||
| Supported | ||
| Roland DG Connect Designer VC Module | Supported |
*1 : The ink consumption is updated every 3 hours.
*2 : Error notifications, alert notifications, and print completion time notifications will not be sent to your PC or mobile devices.
*3 : The warranty status may not be displayed depending on your region.
*4 : The print completion time prediction, health check, and thumbnail display are not available. The status display during service calls cannot be shown. This feature is only available when the printer is connected to Roland VersaWorks via a network connection.
*5: Printer firmware upgrades cannot be performed from a Mac PC.
(자동 번역 사용)