Recursos suportados pelo Roland DG Connect para o modelo Type 5
Os modelos a seguir têm limitações em alguns dos recursos do Roland DG Connect. Consulte a tabela a seguir para ver as limitações e disponibilidades.
Para usar corretamente os recursos do Roland DG Connect, você deve ter a versão mais recente dos itens a seguir.
O Roland DG Connect Hub também deve estar instalado no mesmo PC que o VersaWorks.
Roland DG Connect Hub
VersaWorks
The firmware of the printer you are using
Type 5 Models: EJ-640, RT-640, XT-640
| Roland DG Connect feature | Supported/not supported | Remarks |
| Limited support | *1 | |
| Not supported | ||
| Not supported | ||
| Supported | ||
| Not supported | ||
| Supported | *5 | |
| Supported | ||
| Limited support | *2 | |
| Dealer Registration | Supported | |
| Limited support | *3 | |
| Limited support | *4 | |
| Not supported | ||
| Not supported | ||
| ROI Business Dashboard Job log | Not supported | |
| Business Dashboard Ink, media usage display | Not supported | |
| Business Dashboard Operational History | Not supported | |
| Versaworks Settings Backup | Supported | |
| Versaworks Job Backup | Supported | |
| Versaworks Remote | Supported |
|
| Not supported | ||
| Supported | ||
| Supported | ||
| Supported | ||
| Roland DG Connect Designer VC Module | Supported |
*1 : The ink consumption is updated every 3 hours.
*2 : Error notifications, alert notifications, and print completion time notifications will not be sent to your PC or mobile devices.
*3 : The warranty status may not be displayed depending on your region.
*4 : The print completion time prediction, health check, and thumbnail display are not available. The status display during service calls cannot be shown. This feature is only available when the printer is connected to Roland VersaWorks via a network connection.
*5: Printer firmware upgrades cannot be performed from a Mac PC.
（Usar tradução automática）